BHANU BRASS INDUSTRIES offer a range of Brass Pool Cover Anchors which are highly valuable for our customers. Pool Anchors are manufactured from high-quality raw material as per international quality standards.
We customize our products in varied dimensions upon customer’s needs and requirements. Brass Pool Anchors are defined in various types such as Pool Safety Cover Anchors, Brass Pool Cover Anchors, Brass Pool Spring Anchors & Brass Pool Flange Anchors, etc. Brass Pool Anchors are temperature resistant, simple, and easy to apply or install. It allows the cover to be easily and securely installed by unscrewing the bolt to receive hooks on a rubber tie, a rubber tie hole, or the rounded ring end of stainless steel spring.
We have a wide range of Brass Pool Anchors assembly for in-ground swimming pool safety covers and mesh Brass pool, cover Anchor. Brass winter safety pool covers safety cover anchors brass concrete anchors.
Our pool covers are secure to the deck surface with rustproof Brass Anchors. When not in use they recess flush with the deck.
Our design is similar to major brands such as Loop-Loc, Rayner, Latham, GLI, and most major safety cover distributes.
Major Export in United States, Italy, Germany, Portugal, Poland, France, Russia, Lithuania, Israel, Netherlands, Belgium Spain, Ukraine, Finland, etc.
According to Standard Sizes : 9/16″ x 12 BSW Brass Pool Cover Anchors
5/8″ x 11 UNC Brass Pool Cover Anchors : Solid Brass Anchor Assembly.
Brass Pool Cover Anchors Features
- High Tensile Strength
- Fine Finish
- Optimum resistance against corrosion
- Brass Deck Anchors
- Perfect Fitting
- Hardened Steel Tools
- 4000+ lb. strap break strength
- Super Easy to use
- Fit this anchor most major brads
- Keep your home safe
No matter what your pool deck is made of brass anchors and flanges you need to safely and securely install your pool’s safety cover. Matching brass flanges and escutcheons are available to provide a finished professional look that holds your safety cover in place all winter long.
Brass Pool Cover Anchor Bolts Advantages
Brass Pool anchors flanges are ideal for broom-finished pool decks as the finishing process entrails some air bubbles into the concrete’s top surface layers. Make sure to use a sharp hammer drill bit when drilling for installation to prevent cracks or chips in the concrete. If chips do occur these brass escutcheon plates hide the marring for a professional, fresh look.
Wood deck anchors are designed to improve grip on wooden pool deck installations. The anchor’s horizontal flange spread out the tension of your safety cover, providing a safer and more secure installation. You should pre-fill the screw holes and use a Forster bit to counter-sink these wood deck anchor flanges to be flush with your deck’s surface. Brass screws are included.
Grades & Specification
Brass is a metal alloy that is always made with a combination of copper and zinc. By varying the amount of copper and zinc, brass can be made harder or softer. Other metals – such as aluminum, lead, and arsenic – may be used as alloying agents to improve Mach inability and corrosion resistance. The list of different grades is below.
Free Cutting Brass Rods:
- B 16 C 38500
- BS 2874 CZ – 121Pb3 or CZ124
- C 36000
- IS319 Grade I/ II/ III
- JIS3250 H C3604 or C3602
Forging Brass Rods:
- ASTM B 124 C37700
- BS 2874 CZ 122
- IS 3488 Forging Brass
Riveting Brass Rods:
- IS 4170 CuZn40
- BS 2874 CZ109
- JIS 3250 H C2800
- ASTM B171 C 36500
- IS 4413 CuZn37
- BS 2872 CZ108
Naval Brass Rods:
- IS291 Grade I or II
- BS 2874 CZ 112
- JIS 3250 C4622
- ASTM C48200
How to install Brass Pool Cover Anchors
First of all, create a hole with the help of a drill as per the outer diameter of Brass Anchors. With the help of Hammer put brass Anchors into the Hole. After that take a required Bolt for screwing and fix it with an appropriate spanner. It is very simple and easy to apply.
Installation:
- Drill a hole as per the external diameter of brass anchor
- Hammer anchors brass into the hole
- Take a required bolt for screwing
- Fix it with suitable spanner
Material: Brass – BS 2872 CZ 112
Finish: Natural, Electro-Tin, Chrome or Nickel-plated, Brass
Sizes: M4, M5, M6, M8, M10, M12, M14 and as per our valuable customers specification
Threads:
- ISO metric (MM Threads)
- BA Threads
- BSW Threads
- UNC & UNF Threads
- As per Customers Requirements
Sample Time: Available in 5-10 days for different items.
Drawing Format: CAD / PDF / DWG / IGS / STEP.
Packaging: Standard package, Carton box or Pallet, As per customized specifications
Shipping: DHL, FEDEX, UPS and By Sea or as per client’s requirements.
We can manufacture and export Brass Products as per specifications (custom drawing and samples) for more information, please
